DEKART is a universal GNSS geodetic accuracy receiver. This is a professional device at an affordable price that meets all modern requirements in geodetic works.
It can be used as a Base or Rover in RTK mode.
Batteries can be switched by the hot-swappable way. You can survey as long as need due to high battery capacity.
Easy setup and measurements in the browser of any of your device with Wi-Fi
RTK&GO
High-precision solution in real time or in post-processing
2SIM GSM/UHF*
With the function of automatically switching to the most stable correction stream (optional)
8 GB
Raw data and coordinates are recorded in 8 GB internal memory
Hot-swappable batteries
Separate power supply from 2x batteries
TECHNOLOGIES
Our own developments that make GNSS technology easier and more affordable
WEB SURVEY
All the features of field software directly in the browser of any of your devices! Learn More
STEADY STREAM
Automatically switching between all available channels: 2 SIM cards and UHF Learn More
RTK&GO
Be confident in your field data by combining RTK and Stop&Go modes Learn More
360° VIEW
Panoramic indication to check the status of the receiver from whatever side you look Learn More
TECHNOLOGIES
WEB SURVEY
The operating system no longer matters if your device has Wi-Fi. Android, IOS, Windows, etc. - use a browser for full control and management of the GNSS receiver via the Web interface.
You can add your coordinate system and antenna parameters, take points in RTK mode, or convert raw data to RINEX directly in your browser! Now all the field data is stored in the receiver's internal memory so that you don't lose it if something happens to your controller.
The Quick Install feature allows you to step-by-step configure the receiver and its communication modules. Sharing the web interface with our other technologies will make your work simple and convenient!
TECHNOLOGIES
STEADY STREAM
Use only the most stable stream of corrections.The Steady Stream technology allows your device to use both UHF and GSM connection at the same time. It will ensure reliable reception of corrections even in case of a change in connection type. Automatically switching takes only 5 seconds. So your receiver will not lose a fixed solution throughout the work area.
Intelligent selection of the most reliable correction stream between GSM1, GSM2 and UHF - the Steady Stream technology automatically switches the type of communication depending on the availability or absence of the UHF or GSM signals. Unlike most modems, automatically switching between SIM cards depends on the stability of receiving the correction stream. Parameters like signal/noise ratio and status of Internet connection don't influence on switching.
TECHNOLOGIES
RTK&GO
Be confident in your field data by combining RTK and Stop&Go modes.
Your receiver during the RTK mode will produce the same measurements in Stop&Go mode. Thanks to this, you can always post-process measurements in case of any problems with the RTK
TECHNOLOGIES
360° VIEW
The LEDs on the receiver are located in such a way that you do not have to rotate it to find out its work status. From almost any side, LEDs will be available to you.